NSN 5306-00-045-1970
Coaxial Connector
Between 7.724 inches and 7.771 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: 0.562 inches .
Manufacturer part number 107C2603-1 for national stock number 5306000451970.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-045-1970.
-
MPN or Model
107C2603-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.344 inches and 0.391 inches -
Fastener Length
Between 7.724 inches and 7.771 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.105 inches first hole and 0.108 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
7.380 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
7.569 inches first hole and 7.601 inches first hole -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-486-8675 MPN A02E2740-8Cover Subassy
- 1680-00-862-9180 MPN 414C1123-4Pedal Adjustmen Arm
- 1560-00-875-1469 MPN 114S2703-1Tie Down Plate
- 5930-01-261-2776 MPN 145E3579-2Proximity Switch
- 4920-01-310-7151 MPN 145G0283-1Aircraft Maintenance Fixture
- 1560-01-353-2421 MPN A15PS410-2Aircraft Fuel Tank
- 1680-01-365-7933 MPN 145SK262-1Aircraft Components Modification Kit
- 1560-01-451-5345 MPN 114S3308-130Aircraft Cap
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-045-1970 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
107C2603-1 | The Boeing Company |
107C2603-1 | The Boeing Company |