NSN 5306-00-050-9401
Wheel Bolt
0.688 inches fastener length, hexagon head style, between 0.115 inches and 0.135 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number J293P08B for national stock number 5306000509401.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-050-9401.
-
MPN or Model
J293P08B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.596 inches and 0.616 inches -
Fastener Length
0.688 inches -
Head Style
Hexagon -
Head Height
Between 0.115 inches and 0.135 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.072 inches and 0.092 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Minimum Yield Strength
85000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-140-2609 MPN 9018M21P02Cowl Thrust Reverser Stop
- 4920-00-218-0846 MPN 21C5080G01Aircraft Engine Accessories Maintenance Stand
- 4920-00-775-1583 MPN 21C798Aircraft Engine Maintenance Fixture
- 5905-00-931-3537 MPN R984P0320AInductive Wire Wound Fixed Resistor
- 5905-00-957-8795 MPN R983P1002BFilm Fixed Resistor
- 5905-00-958-3506 MPN R984P7150AInductive Wire Wound Fixed Resistor
- 4920-01-098-5379 MPN 17A8018G01Throttle Position Transmitter
- 4920-01-131-8627 MPN 21C8061P01Lube Drain Adapter
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-050-9401 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J293P08B | General Electric Company |
MS9489-09 | Military Standards |