NSN 5306-00-051-1398
Wheel Bolt
2.297 inches fastener length, hexagon head style, between 0.266 inches and 0.297 inches head height, width between flats: between 0.492 inches and 0.501 inches .
Manufacturer part number NASM20074-05-22 for national stock number 5306000511398.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-051-1398.
-
MPN or Model
NASM20074-05-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.547 inches -
Fastener Length
2.297 inches -
Head Style
Hexagon -
Head Height
Between 0.266 inches and 0.297 inches -
Width Between Flats
Between 0.492 inches and 0.501 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.312 inches -
Grip Length
1.750 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-045-5422 MPN RW69VR10Inductive Wire Wound Fixed Resistor
- 5935-00-088-8715 MPN MS3114F14-12PElectrical Receptacle Connector
- 5935-00-109-0662 MPN MS24266R22T55PYElectrical Plug Connector
- 5935-00-158-4810 MPN MS3106F40-56PElectrical Plug Connector
- 5935-00-196-2264 MPN MS3106A18-9SElectrical Plug Connector
- 5975-00-223-1853 MPN MS39040-1Bridle Ring
- 5935-00-232-2682 MPN MS24265R14B15SNElectrical Receptacle Connector
- 5935-00-250-5721 MPN MS27497T18B32PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-051-1398 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM20074-05-22 | Military Standards |
MS20074-05-22 | Military Standards |