NSN 5306-00-051-2346
Wheel Bolt
4.297 inches fastener length, hexagon head style, between 0.266 inches and 0.297 inches head height, width between flats: between 0.492 inches and 0.501 inches .
Manufacturer part number MS20074-05-42 for national stock number 5306000512346.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-051-2346.
-
MPN or Model
MS20074-05-42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.547 inches -
Fastener Length
4.297 inches -
Head Style
Hexagon -
Head Height
Between 0.266 inches and 0.297 inches -
Width Between Flats
Between 0.492 inches and 0.501 inches -
Hole Diameter
0.062 inches -
End Application
Spec item -
Thread Diameter
0.312 inches -
Grip Length
3.750 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-009-3083 MPN MS27506A9-1Electrical Connector Cable Clamp
- 5935-00-011-7873 MPN MS3107B24-2PElectrical Plug Connector
- 5940-00-082-4662 MPN MS27249-3B1Terminal Board
- 5935-00-087-0044 MPN MS3110E22-21PElectrical Receptacle Connector
- 5905-00-111-4743 MPN MS35043-61Composition Fixed Resistor
- 5935-00-246-8913 MPN MS24266R12B3S6Electrical Plug Connector
- 5935-00-253-0141 MPN MS3119-12-10WConnector Adapter
- 5935-00-258-9086 MPN MS3102A22-19PWElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-051-2346 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20074-05-42 | Military Standards |
MS20074-05-42 | Military Standards |
Stock Check
- NS: 239