NSN 5306-00-051-7442
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.078 inches shoulder thickness, between 1.515 inches and 1.562 inches shank length, eye stock thickness: between 0.120 inches and 0.130 inches .
Manufacturer part number AN43BC14A for national stock number 5306000517442.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-051-7442.
-
MPN or Model
AN43BC14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.453 inches and 0.500 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.078 inches -
Shank Length
Between 1.515 inches and 1.562 inches -
Eye Stock Thickness
Between 0.120 inches and 0.130 inches -
Shoulder Diameter
0.500 inches -
Overall Length
2.281 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
2.185 inches -
Eye Outside Width
0.500 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5305-00-023-2563 MPN NAS603-65Machine Screw
- 5305-00-058-2067 MPN NAS135206H6PSocket Head Cap Screw
- 5305-00-060-9253 MPN NAS1123-4HClose Tolerance Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-051-7442 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN43BC14A | National Aerospace Standards |
AN43BC14A | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 12/07/23.
The quantities and conditions available at the time were:
- NS: 6
- NE: 124