NSN 5306-00-052-5993
Coaxial Connector
Between 3.218 inches and 3.265 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number NAS464P7A45 for national stock number 5306000525993.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-052-5993.
-
MPN or Model
NAS464P7A45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.406 inches and 0.453 inches -
Fastener Length
Between 3.218 inches and 3.265 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
2.812 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-253-5011 MPN NAS1650R22B55SXElectrical Receptacle Connector
- 5305-00-007-1565 MPN NAS1100E06-8PMachine Screw
- 5305-00-008-5896 MPN NAS1102C5-10Machine Screw
- 5305-00-035-5383 MPN NAS1581A3H13TClose Tolerance Screw
- 5305-00-051-4505 MPN MS51973-31Setscrew
- 5305-00-071-2538 MPN MS24694S192Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-127-5685 MPN NAS1152V3Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-052-5993 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P7A45 | National Aerospace Standards |