NSN 5306-00-052-6607
Wheel Bolt
1.344 inches fastener length, hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 333095-4 for national stock number 5306000526607.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-052-6607.
-
MPN or Model
333095-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.344 inches -
Head Style
Hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.163 inches first hole -
Material
Steel comp 4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-295-3141 MPN 2722356Electrical Solenoid
- 4920-00-819-6399 MPN 50000T28Seal Remover
- 5935-01-038-1760 MPN 955531-1Plug Dummy Connector
- 5950-01-057-7744 MPN 970191-1Differential Transformer
- 4820-01-417-5845 MPN 23055Directional Control Linear Valve Sleeve And Slide
- 1560-01-567-4203 MPN 26054Qad Parts Kit
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-052-6607 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
333095-4 | Parker-hannifin Corporation |