NSN 5306-00-054-4855
Close Tolerance Hex Head Bolt
1.750 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: 0.938 inches .
Manufacturer part number 215-44462-1 for national stock number 5306000544855.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-054-4855.
-
MPN or Model
215-44462-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.750 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.938 inches -
Grip Diameter
Between 0.6234 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
18 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.562 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-242-3591 MPN 216-30598-8Antenna Support
- 1560-00-305-3281 MPN CV15-508549-1Shaft Coupling
- 4920-00-489-6483 MPN 215-01266-38Hydraulic Cyli Base
- 4820-00-562-5051 MPN CV15-405525Main Fuel Cell Fitting Assembly
- 1560-00-590-4130 MPN CV15-158036-2Rudder Fee Arm Assy
- 1560-00-852-9835 MPN 215-30533-1Brake Flap Pivot Pin Retainer
- 5935-00-878-1605 MPN 202-26203-1EElectrical Receptacle Connector
- 5935-01-108-3905 MPN CVC2628H25-32Electrical Connector Backshell
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-054-4855 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
215-44462-1 | Triumph Aerostructures, Llc |