NSN 5306-00-057-4161
Coaxial Connector
3.175 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1304-44D for national stock number 5306000574161.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-057-4161.
-
MPN or Model
NAS1304-44D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
3.175 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
96000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
2.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.997 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1304 professional/industrial association standard
More from these suppliers
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 1560-01-628-0450 MPN 9-66093Aircraft Channel
- 5305-00-007-1557 MPN NAS1100C04-12PMachine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-020-3813 MPN NAS1351C00-2Socket Head Cap Screw
- 5305-00-052-7425 MPN MS35198-92Machine Screw
- 5305-00-058-2599 MPN NAS1620-3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-057-4161 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-44D | National Aerospace Standards |