NSN 5306-00-058-7708
Wheel Bolt
0.562 inches fastener length, double hexagon extended washer head style, 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 6844584-12071 for national stock number 5306000587708.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-058-7708.
-
MPN or Model
6844584-12071
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.562 inches -
Fastener Length
0.562 inches -
Head Style
Double hexagon extended washer -
Head Height
0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.250 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Double hexagon flats -
Material
Steel comp 410 -
Material Specification
Ams5613 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-557-4398 MPN 8599442-006Lug Terminal
- 5930-00-569-4247 MPN 1869008Switch Subassembly
- 5930-00-615-6784 MPN 8599423-102Push Switch
- 5935-00-850-0479 MPN 6799254-2Electrical Receptacle Connector
- 5905-00-918-2949 MPN 6509689Composition Fixed Resistor
- 4920-00-707-4626 MPN 6799152Hydraulic And Pneumatic System Components Electric Test Stand
- 4820-01-303-6517 MPN 326 7384Valve
- 5305-00-012-1906 MPN 121906Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-058-7708 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6844584-12071 | Allison Transmission, Inc. |
6844584-12071 | General Motors Corp |