NSN 5306-00-059-1212
Coaxial Connector
1.078 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: 0.562 inches .
Manufacturer part number 3M33-6-7A for national stock number 5306000591212.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-059-1212.
-
MPN or Model
3M33-6-7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.640 inches -
Fastener Length
1.078 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Single Shear Strength
8600 pounds per square inch -
Thread Diameter
0.375 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-015-1450 MPN 32-15515-602Flap Up Stop Bracket
- 1560-00-046-4591 MPN 32-37004-3Aircraft Stringer
- 1560-00-050-0000 MPN 32-33002-248Aircraft Skin
- 1560-00-072-5879 MPN 53-64029-3Air Interconnec Arm
- 1560-00-122-8055 MPN 32-21185-1Stabilizer Support Bracket
- 1560-00-172-7594 MPN 53G970530-6Aircraft Skin
- 1680-00-249-3842 MPN 68A640057-2003Steering Car Piston
- 1560-00-270-1162 MPN 68A480641-2005Arresting Hook Centering Arm
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-059-1212 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-6-7A | Boeing Company, The |