NSN 5306-00-060-8114
Coaxial Connector
7.078 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: 0.562 inches .
Manufacturer part number 3M33-6-103 for national stock number 5306000608114.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-060-8114.
-
MPN or Model
3M33-6-103
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Fastener Length
7.078 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
6.437 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.875 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-017-0673 MPN 32-32467-66Aircraft Former
- 4920-00-066-3100 MPN 53E150010-1Test Adapter
- 1560-00-137-7638 MPN 32-30038-7Airframe Fitting
- 1680-00-175-5627 MPN 32-60057-335Aircraft Glareshield
- 1560-00-280-6415 MPN 68A350721-2003Canopy Jettison Support
- 1680-00-283-2566 MPN 53-79601D42Wire Bundle Assembly
- 5935-00-328-3551 MPN ST5M1285-12F1Electrical Connector Backshell
- 1560-00-361-8207 MPN 68A335091-1002Aircraft Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-060-8114 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-6-103 | Boeing Company, The |