NSN 5306-00-061-7949
Stripper Bolt
1.940 inches fastener length, hexagon head style, 0.080 inches head height, width between flats: between 0.556 inches and 0.562 inches .
Manufacturer part number 26-760521-1 for national stock number 5306000617949.
Datasheet
-
Product description
Shoulder Bolt NSN 5306-00-061-7949.
-
MPN or Model
26-760521-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.340 inches -
Fastener Length
1.940 inches -
Head Style
Hexagon -
Head Height
0.080 inches -
Width Between Flats
Between 0.556 inches and 0.562 inches -
Shoulder Diameter
0.374 inches first shoulder -
Shoulder Length
1.600 inches first shoulder -
Shank Unthreaded Hole Diameter
0.067 inches first hole -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 42.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.810 inches first hole -
Shoulder Shape
Round first shoulder -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, f4 military specification single material response -
Surface Treatment
Cadmium and chromium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-106-3354 MPN 215-32466-1Hydraulic Lines Support
- 5945-00-133-9124 MPN 215-27179-1Relay Assembly
- 1560-00-141-5755 MPN 218-33404-1Fuel Tank Insert
- 1560-00-149-9736 MPN 218-40021-27Bulkhead Cap
- 5935-00-820-2865 MPN CVC5892A66P6CElectrical Receptacle Connector
- 1560-00-852-8033 MPN 215-36383-2Rain Duct
- 1680-00-852-9202 MPN 215-28301-3Bell Crank
- 1560-00-853-3812 MPN 215-76301-7Insulation
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes thumbscrew.
Pricing and Availability
Get a quote for 5306-00-061-7949 shoulder boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
26-760521-1 | Triumph Aerostructures, Llc |