NSN 5306-00-061-7950
Coaxial Connector
1.500 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number 26-910619-1 for national stock number 5306000617950.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-061-7950.
-
MPN or Model
26-910619-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.360 inches -
Fastener Length
1.500 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Grip Diameter
Between 0.3748 inches and 0.3750 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
1.140 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.360 inches first hole -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-103-0573 MPN 216-60090-4Aircraft Tip
- 1560-00-106-4801 MPN 215-40060-18Aircraft Former
- 1560-00-124-2794 MPN 218-30507-1Fuselage Keel Assy
- 5940-00-150-4308 MPN CVC810-7A4Lug Terminal
- 1680-00-168-3785 MPN 218-37700-2Branched Wiring Harness
- 1560-00-305-3114 MPN CV15-158539-2Rudd Jackshaft Assy
- 1560-00-422-2402 MPN 218-37159-3Structur Panel Assy
- 1560-00-479-9936 MPN 216-60206-3Aircraft Leading Edge
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-061-7950 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
26-910619-1 | Triumph Aerostructures, Llc |