NSN 5306-00-062-4254
Coaxial Connector
0.594 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 3M33-4-2 for national stock number 5306000624254.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-062-4254.
-
MPN or Model
3M33-4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
0.594 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.437 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-505-2894 MPN LS15265V3-8Close Tolerance Screw
- 5305-01-069-9277 MPN BACB30LU6D7Close Tolerance Screw
- 5305-01-090-6336 MPN BACB30LR4-24Close Tolerance Screw
- 5305-01-202-8325 MPN BACS12CK3U16Machine Screw
- 5305-01-435-3141 MPN BACB30LU6-23Close Tolerance Screw
- 5305-01-462-2729 MPN 3M1169V4-6AClose Tolerance Screw
- 5305-01-519-1249 MPN BACS12CK3-5Machine Screw
- 5306-00-111-1159 MPN 9651M85P03Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-062-4254 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4-2 | Boeing Company, The |
3M33-4-2 | Arconic Global Fasteners & Rings, |
3M33-4-2 | Valley-todeco, Inc. |
3M33-4-2 | Sps Technologies, Llc |
3M33-4-2 | Huck International, Inc. |
3M33-4-2 | Sps Technologies, Llc |
3M33-4-2 | Alcoa Global Fasteners, Inc. |