NSN 5306-00-062-5139
Wheel Bolt
2.313 inches fastener length, hexagon head style, 0.190 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number 215-24557-1 for national stock number 5306000625139.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-062-5139.
-
MPN or Model
215-24557-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.563 inches -
Fastener Length
2.313 inches -
Head Style
Hexagon -
Head Height
0.190 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
1.750 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.125 inches first hole -
Material
Steel -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-049-1048 MPN CVC6063E6121SG1Electrical Receptacle Connector
- 5935-00-057-3673 MPN CVC6066A12SElectrical Receptacle Connector
- 5905-00-104-8368 MPN DCB4701Composition Fixed Resistor
- 1560-00-115-3504 MPN 215-28365-2Spring Adapter
- 1560-00-449-3491 MPN 216-20047-23Aircraft Access Door
- 4920-00-784-1313 MPN CV21-206544-1Alignment Assembly
- 1560-00-852-8256 MPN 215-26412-3Insulation
- 1560-00-852-8258 MPN 215-46301-12Insulation
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-062-5139 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
215-24557-1 | Triumph Aerostructures, Llc |