NSN 5306-00-062-6644
Wheel Bolt
0.375 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 2-130-135-01 for national stock number 5306000626644.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-062-6644.
-
MPN or Model
2-130-135-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
0.375 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Hole Diameter
0.051 inches -
Thread Diameter
0.190 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
123000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Round longitudinal hole -
Material
Steel comp 8740 -
Material Specification
Ams 5322 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-003-1899 MPN 289428-1Aircraft Maintenance Fixture
- 4920-00-522-3795 MPN LTCT10568-01Air Pres Valve Assy
- 5930-00-592-3504 MPN SE11085Rotary Switch
- 4820-00-616-6062 MPN 967458-1Valve Seat
- 4920-01-091-2916 MPN 3505154-6-1Special Air Turbine Starter
- 4820-01-195-7597 MPN 884014-1Special Shaped Actuator Valve Diaphragm
- 4920-01-351-1039 MPN 3661493-1Second St Balance Arbor Assembly
- 1560-01-457-5024 MPN 75927Aircraft Structural Plate
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-062-6644 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2-130-135-01 | Honeywell International Inc. |