NSN 5306-00-063-7673
Coaxial Connector
0.457 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1304-1H for national stock number 5306000637673.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-063-7673.
-
MPN or Model
NAS1304-1H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.457 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.062 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1304 professional/industrial association standard
More from these suppliers
- 5940-00-688-6000 MPN NAS705T2Stud Terminal
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5940-01-425-7399 MPN NAS1063C8-303Terminal Board Marker Strip
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-050-1077 MPN MS90725-118Hexagon Head Cap Screw
- 5305-00-052-5968 MPN MS35202-14Machine Screw
- 5305-00-071-2214 MPN MS35274-67Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-063-7673 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-1H | National Aerospace Standards |