NSN 5306-00-064-4367
Coaxial Connector
1.469 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: 0.625 inches .
Manufacturer part number 3M33-7H13 for national stock number 5306000644367.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-064-4367.
-
MPN or Model
3M33-7H13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.657 inches -
Fastener Length
1.469 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
0.625 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Single Shear Strength
11700 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-539-5326 MPN ST3M454-3L10Close Tolerance Screw
- 5305-01-513-6935 MPN ST3M557-3-9Close Tolerance Screw
- 5305-01-513-8902 MPN VCL0010-6-18Close Tolerance Screw
- 5306-00-607-1145 MPN VEPS132121-3F6Shear Bolt
- 5306-00-708-7672 MPN VAL21013-12040Shear Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-027-1997 MPN GB511BY4M18Close Tolerance Bolt
- 5306-01-045-2867 MPN VAL23608-4-22Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-064-4367 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-7H13 | Boeing Company, The |
3M33-7H13 | Arconic Global Fasteners & Rings, |
3M33-7H13 | Valley-todeco, Inc. |
3M33-7H13 | Sps Technologies, Llc |
3M33-7H13 | Huck International, Inc. |
3M33-7H13 | Sps Technologies, Llc |
3M33-7H13 | Sps Technologies, Llc |
3M33-7H13 | Alcoa Global Fasteners, Inc. |
3M33-7-13H | Boeing Company, The |