NSN 5306-00-064-8430
Wheel Bolt
0.625 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number 1611208-3 for national stock number 5306000648430.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-064-8430.
-
MPN or Model
1611208-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.542 inches -
Fastener Length
0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Zinc -
Surface Treatment Specification
Qq-z-325, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-053-2766 MPN 2124677Valve Seat
- 5905-00-060-3176 MPN 2243243-10Wire Wound Fixed Resistor
- 5950-00-070-1539 MPN 2469400-13Radio Frequency Coil
- 5940-00-073-2307 MPN 1667494PC3Terminal Board
- 5935-00-083-2912 MPN 61A5A52-2Electrical Plug Connector
- 5905-00-117-4329 MPN SW120-230Composition Fixed Resistor
- 5935-00-131-2206 MPN 67A58A21Electrical Receptacle Connector
- 5950-00-153-5337 MPN 300217PC253Electrical Coil
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-064-8430 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1611208-3 | Navair And Navsea Managed |