NSN 5306-00-066-1329
Wheel Bolt
0.862 inches fastener length, round w/wrench flats head style, 0.492 inches head diameter, head height: 0.250 inches .
Manufacturer part number 7791864 for national stock number 5306000661329.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-066-1329.
-
MPN or Model
7791864
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.390 inches and 0.420 inches -
Fastener Length
0.862 inches -
Head Style
Round w/wrench flats -
Head Diameter
0.492 inches -
Head Height
0.250 inches -
Width Between Flats
0.442 inches -
Thread Diameter
0.250 inches -
Grip Length
0.823 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
35.0 rockwell c and 42.0 rockwell c -
Material
Steel -
Material Specification
Qq-s-763, class 420 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-std-171, 5.4.1 military standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-116-2762 MPN 10545610Push Switch
- 5905-00-211-1886 MPN 8213508-8Inductive Wire Wound Fixed Resistor
- 5935-00-240-8175 MPN 7599459Plug-in Electronic Components Socket
- 5905-00-434-1935 MPN 7599055Film Fixed Resistor
- 5935-01-168-5994 MPN 11834460-19Electrical Connector Backshell
- 4820-01-193-3058 MPN 9375530Calibrated Flow Valve
- 5935-01-198-7932 MPN 9311605-1Electrical Connector Retaining Plate
- 5985-01-490-7109 MPN 12937591Antenna Cover
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-066-1329 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7791864 | Us Army Ardec Rdecom |
7791864 | Springfield Armory |