NSN 5306-00-067-8027
Coaxial Connector
1.625 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: 0.304 mils and 0.313 centimeters.
Manufacturer part number MS9089-24 for national stock number 5306000678027.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-067-8027.
-
MPN or Model
MS9089-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
1.625 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
0.304 mils and 0.313 centimeters -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
0.070 inches -
Grip Diameter
0.2210 mils and 0.2310 centimeters -
Thread Diameter
0.250 inches -
Grip Length
0.875 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 8740 steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Ams6322 assn standard single material response mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5306-01-227-6237 MPN AE82847GShoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-067-8027 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9089-24 | Eaton-aeroquip Llc. |
MS9089-24 | Eaton-aeroquip Llc. |
MS9089-24 | Eaton-aeroquip Llc. |
MS9089-24 | Eaton-aeroquip Llc. |
MS9089-24 | Eaton-aeroquip Llc. |
MS9089-24 | Eaton-aeroquip Llc. |