NSN 5306-00-067-9423
Coaxial Connector
1.469 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 123LM10018-1 for national stock number 5306000679423.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-067-9423.
-
MPN or Model
123LM10018-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
1.469 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.104 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
1.063 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.289 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-066-6455 MPN 123PM10323-5Cowl Fitting
- 5930-00-148-8339 MPN 1128SCSEA711-3Pressure Switch
- 5935-00-198-3926 MPN GC800B19-20PXElectrical Plug Connector
- 1560-00-238-7017 MPN 1128CM43206-11Support Fitting
- 5935-00-355-4626 MPN A800RE10-24Electrical Connector Backshell
- 1560-00-373-5282 MPN 89F1096-1Carriage Asy
- 5935-00-400-1479 MPN GC810HT1Electrical Plug Connector
- 1560-00-418-6332 MPN 128CSM10556-5Side Roll Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-067-9423 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123LM10018-1 | Northrop Grumman Systems Corporation |
123LM10018-1 | Northrop Grumman Systems Corporation |
Stock Check
- NS: 6
- NE: 150