NSN 5306-00-072-4155
Coaxial Connector
5.781 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: 0.625 inches .
Manufacturer part number 65150-00066-101 for national stock number 5306000724155.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-072-4155.
-
MPN or Model
65150-00066-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
5.781 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
0.625 inches -
Grip Diameter
Between 0.4415 inches and 0.4420 inches -
Thread Diameter
0.438 inches -
Grip Length
5.313 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-026-0667 MPN 61200-63027-042Aircraft Floor Panel
- 1560-00-109-9769 MPN 65200-08001-046Aft Sponson Assy
- 1560-00-159-0967 MPN 65201-05024-102Cabin Aft Fitting
- 1560-00-159-1103 MPN 61200-61512-041Aircraft Access Door
- 1560-00-205-2277 MPN 65205-08028-101Support Fairing
- 1560-00-482-0794 MPN S6122-83133-6Fuel Tank Liner
- 1560-00-562-4426 MPN S6107-35208-6Gear Box Parts Kit
- 1560-00-690-3537 MPN S14-30-3023-1Fuel Selector Housing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-072-4155 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65150-00066-101 | Sikorsky Aircraft Corporation |