NSN 5306-00-072-4160
Coaxial Connector
5.531 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: 0.625 inches .
Manufacturer part number 65150-00066-106 for national stock number 5306000724160.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-072-4160.
-
MPN or Model
65150-00066-106
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
5.531 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
0.625 inches -
Grip Diameter
Between 0.4395 inches and 0.4400 inches -
Thread Diameter
0.438 inches -
Grip Length
5.062 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-182-5718 MPN 65200-08029-011Aircraft Pylon
- 1560-00-439-0102 MPN 65302-12523-102Separator Deflector
- 1560-00-574-0921 MPN S14-40-1035-1Flight Control Tube
- 4920-00-654-1388 MPN S1670-10331-3Main Rotor Plate
- 1560-00-675-1768 MPN S6135-20150-000Bearing Housing
- 1560-00-700-2500 MPN S6140-62604Brake Control Quadrant
- 1560-00-822-3936 MPN S1635-61207-1Support Beari Liner
- 1560-00-822-3993 MPN S6120-61002-6Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-072-4160 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65150-00066-106 | Sikorsky Aircraft Corporation |