NSN 5306-00-072-4164
Coaxial Connector
2.469 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: 0.625 inches .
Manufacturer part number 65150-00066-130 for national stock number 5306000724164.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-072-4164.
-
MPN or Model
65150-00066-130
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
2.469 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
0.625 inches -
Grip Diameter
Between 0.4515 inches and 0.4520 inches -
Thread Diameter
0.438 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-065-2631 MPN S6135-20821-001Oil Pump Cap
- 1680-00-065-6217 MPN S6142-61101-1Aircraft Control Stick
- 1560-00-076-5277 MPN 65203-09011-104Aircraft Fairing
- 1560-00-439-0127 MPN 65500-00021-089Cockpit Air Duct
- 1680-00-506-0454 MPN S1675-10067Linear Electro-mechanical Actuator
- 1560-00-520-0993 MPN S14-30-3242-2Universal Torque Shaft
- 1560-00-627-3716 MPN 65209-04005-042Fitting Assembly
- 1560-00-675-5779 MPN S1620-62103-8Fuselage Botto Skin
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-072-4164 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65150-00066-130 | Sikorsky Aircraft Corporation |