NSN 5306-00-074-2901
Coaxial Connector
Between 2.766 inches and 2.796 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 65150-00066-115 for national stock number 5306000742901.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-074-2901.
-
MPN or Model
65150-00066-115
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
Between 2.766 inches and 2.796 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4415 inches and 0.4420 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
2.313 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-027-8951 MPN 65207-01049-041Bell Crank
- 4920-00-143-3726 MPN S6172-10004-036Tail Rot Protractor
- 1560-00-168-2149 MPN 65403-07623-041Bell Crank
- 1560-00-261-2962 MPN 65600-09013-044Rotor Housing Assembly
- 1560-00-305-4150 MPN S1620-61298-6Assembly Main Landing Ge Fitting
- 1560-00-405-5335 MPN S6165-62223-042Upper End Cap
- 1560-00-700-3777 MPN S6180-63021-8Suppor Access Panel
- 5930-00-865-7852 MPN S6170-90143-5Rotary Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-074-2901 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65150-00066-115 | Sikorsky Aircraft Corporation |