NSN 5306-00-074-3186
Coaxial Connector
0.828 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1108-6 for national stock number 5306000743186.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-074-3186.
-
MPN or Model
NAS1108-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.203 inches -
Fastener Length
0.828 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-357-3664 MPN NAS1063A14-12Terminal Board Marker Strip
- 5940-01-633-7510 MPN SAE81824/6Conductor Splice
- 5305-00-004-5178 MPN NAS1100V3-7Machine Screw
- 5305-00-007-2952 MPN NAS1100C02-2Machine Screw
- 5305-00-021-3918 MPN MS35308-355Hexagon Head Cap Screw
- 5305-00-057-0534 MPN NASM51958Machine Screw
- 5305-00-058-9362 MPN MS51977-19Setscrew
- 5305-00-067-3863 MPN NAS1189-3P7NSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-074-3186 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1108-6 | National Aerospace Standards |