NSN 5306-00-075-5830
Shouldered Rivet Ring Bolt
About this product
Between 0.313 inches and 0.316 inches eye inside diameter, between 0.078 inches and 0.110 inches shoulder thickness, between 0.828 inches and 0.875 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN45C6A for national stock number 5306000755830.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-075-5830.
-
MPN or Model
AN45C6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Eye Inside Diameter
Between 0.313 inches and 0.316 inches -
Shoulder Thickness
Between 0.078 inches and 0.110 inches -
Shank Length
Between 0.828 inches and 0.875 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
Between 0.672 inches and 0.704 inches -
Overall Length
Between 1.765 inches and 1.908 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 1.406 inches and 1.485 inches -
Eye Outside Width
Between 0.672 inches and 0.704 inches -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-705Terminal Board Marker Strip
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5940-01-425-6038 MPN NAS1063A5-433Terminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-068-1263 MPN NASM24667-89Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-075-5830 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN45C6A | National Aerospace Standards |
AN45C6A | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 09/13/21.
The quantities and conditions available at the time were:
- NE: 1
- NS: 7