NSN 5306-00-076-9899
Close Tolerance Hex Head Bolt
Between 3.703 inches and 3.750 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN177-35A for national stock number 5306000769899.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-076-9899.
-
MPN or Model
AN177-35A
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.625 inches and 0.704 inches -
Fastener Length
Between 3.703 inches and 3.750 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Grip Length
Between 3.046 inches and 3.078 inches
More from these suppliers
- 5935-00-201-6470 MPN AN3106E32-8PElectrical Plug Connector
- 5935-00-204-7613 MPN AN3102E14S2PElectrical Receptacle Connector
- 5935-00-258-8046 MPN AN3106B16S4PElectrical Plug Connector
- 5935-00-665-4677 MPN AN3108B48-4PElectrical Plug Connector
- 5935-00-705-2614 MPN AN3108A16-10SElectrical Plug Connector
- 4820-00-880-4743 MPN AN4103-1Temperature Regulating Valve
- 5935-01-160-6993 MPN AN3106A24-20PElectrical Plug Connector
- 5935-01-239-4266 MPN AN3102A28-11SXElectrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-076-9899 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN177-35A | Aeronautical Standards Group |