NSN 5306-00-077-9307
Coaxial Connector
Between 0.826 inches and 0.856 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 32-94084-7 for national stock number 5306000779307.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-077-9307.
-
MPN or Model
32-94084-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.269 inches and 0.289 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-012-2502 MPN 32-33261-46Floor Tail Cone Angle
- 1560-00-055-5511 MPN 32-11113-9Actuator Support Fitting
- 4920-00-105-1342 MPN 53E340014-13Branched Electrical Special Purpose Cable Assembly
- 1560-00-105-1605 MPN 32-11435-8Spar Spacer
- 1560-00-179-4282 MPN 32G31130-177Door Assembly
- 1560-00-225-0883 MPN 53-32581-1Door Plate Assembly
- 1680-00-249-4023 MPN 68A640060-2001Reaction Cylinder Piston
- 1560-00-261-6098 MPN 68A550811-1001Pylon Airline Adapter
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-077-9307 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
32-94084-7 | Boeing Company, The |
32-94084-7 | Boeing Company, The |