NSN 5306-00-078-0045
Coaxial Connector
1.757 inches fastener length, double hexagon head style, between 0.340 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number EWSB22D10-A18 for national stock number 5306000780045.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-078-0045.
-
MPN or Model
EWSB22D10-A18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.632 inches -
Fastener Length
1.757 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b10 manufacturers standard
More from these suppliers
- 1680-00-006-7993 MPN A51K56586-1Fairing Aft Door Assembly
- 4920-00-008-5442 MPN 1128SME40306-1Dummy Transmitter
- 1560-00-075-0807 MPN 123B10696-4Aircraft Fairing
- 5940-00-180-0993 MPN 123PE50431-1Terminal Board
- 5940-00-194-3264 MPN GT805AU8Conductor Splice
- 1560-00-243-4437 MPN 1128AMM40458-13Actu Aft Canopy Arm
- 1560-00-310-3612 MPN A51G10500-3Bar Launcher
- 5985-00-327-4027 MPN 128SCAV627-1Waveguide Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-078-0045 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22D10-A18 | Sps Technologies, Llc |
C081-10-18 | Lockheed Martin Corporation |
GB511B10-18 | Northrop Grumman Systems Corporation |
C081-10A18 | Lockheed Martin Corporation |
EWSB22-10A18 | Sps Technologies, Llc |
EWSB22-10A18 | Sps Technologies, Llc |