NSN 5306-00-078-0167
Wheel Bolt
0.500 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number J294P05A for national stock number 5306000780167.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-078-0167.
-
MPN or Model
J294P05A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.401 inches -
Fastener Length
0.500 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.079 inches and 0.099 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Minimum Yield Strength
85000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-007-1903 MPN R983P6041CFilm Fixed Resistor
- 5905-00-061-0502 MPN R984P5000AWire Wound Fixed Resistor
- 5905-00-126-5919 MPN R984P4681AInductive Wire Wound Fixed Resistor
- 5905-00-502-2805 MPN 208C620P69Film Fixed Resistor
- 4920-00-571-7687 MPN 21C1160G001Rotor Assembl Pilot
- 4920-00-764-5504 MPN 21C794G002Pneumatic System Components Test Set
- 4820-00-894-5007 MPN 332C792P3Flow Control Valve
- 5905-00-958-3504 MPN R984P7050AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-078-0167 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J294P05A | General Electric Company |
MS9490-06 | Society Of Automotive Engineers Inc |
MS9490-06 | Military Standards |
MS9490-06 | Sae International |