NSN 5306-00-078-3432
Close Tolerance Hex Head Bolt
1.790 inches fastener length, 0.080 inches head height, 0.438 inches width between flats, shank unthreaded hole diameter: 0.076 inches first hole.
Manufacturer part number 26-908501-2 for national stock number 5306000783432.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-078-3432.
-
MPN or Model
26-908501-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Length
0.350 inches -
Fastener Length
1.790 inches -
Head Height
0.080 inches -
Width Between Flats
0.438 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626, cond c4 military specification single material response
More from these suppliers
- 1560-00-100-1153 MPN 215-70050-69Airfoil Rib
- 1560-00-339-2969 MPN 215-30078-20Bulkhead Section Wing Attach
- 1560-00-402-5673 MPN 215-20407-1Ejection Seat Track
- 1560-00-402-8647 MPN 215-30026-255Upper Web
- 4920-00-496-0342 MPN 215-00136-3Control Test Set
- 5930-00-599-9766 MPN 218-21571-30Switch Subassembly
- 4920-00-799-2377 MPN CV21-206055-1Boresight Tool
- 1560-00-852-9803 MPN 215-30511-3Door Hinge Support
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-078-3432 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
26-908501-2 | Triumph Aerostructures, Llc |