NSN 5306-00-079-1586
Coaxial Connector
1.230 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number C081-4-15 for national stock number 5306000791586.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-079-1586.
-
MPN or Model
C081-4-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.292 inches -
Fastener Length
1.230 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-4605 MPN HT4024L3-9Close Tolerance Screw
- 5305-00-524-3959 MPN 7S14-1032-24AMachine Screw
- 5305-01-022-3053 MPN LS15236-04-6Machine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-054-5422 MPN AIC985-4-16Close Tolerance Screw
- 5305-01-054-6233 MPN AIC9535-6-13Close Tolerance Screw
- 5305-01-270-3054 MPN AIC985B3-7Close Tolerance Screw
- 5305-01-310-9248 MPN AIC986-6-7Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-079-1586 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C081-4-15 | Lockheed Martin Corporation |
EWSB22-4A15 | Sps Technologies, Llc |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Alcoa Global Fasteners, Inc. |
C081-4-15 | Lockheed Martin Corporation |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Alcoa Global Fasteners, Inc. |
EWSB22-4A15 | Sps Technologies, Llc |
C081-4-15 | Lockheed Martin Corporation |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Alcoa Global Fasteners, Inc. |
EWSB22-4A15 | Sps Technologies, Llc |
C081-4-15 | Lockheed Martin Corporation |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Sps Technologies, Llc |
C081-4-15 | Alcoa Global Fasteners, Inc. |
EWSB22-4A15 | Sps Technologies, Llc |