NSN 5306-00-079-6411
Coaxial Connector
0.856 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number H401-4-9 for national stock number 5306000796411.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-079-6411.
-
MPN or Model
H401-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
0.856 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-501-9863 MPN LS15267V3-10Machine Screw
- 5305-01-054-5422 MPN AIC985-4-16Close Tolerance Screw
- 5305-01-054-6258 MPN AIC985-3-11Close Tolerance Screw
- 5305-01-055-3803 MPN C9535-1-17Close Tolerance Screw
- 5305-01-056-2158 MPN BACB30LU2-10Close Tolerance Screw
- 5305-01-066-9358 MPN 51B333-25HClose Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-079-6411 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H401-4-9 | Huck International, Inc. |
AIC516B4-9 | Sps Technologies, Llc |
EWSB22D4-A9 | Sps Technologies, Llc |
VS3071-4F9 | Alcoa Global Fasteners, Inc. |
EWSB22-4A9 | Sps Technologies, Llc |
GB511B4-9 | Northrop Grumman Systems Corporation |
EWSB22-4A9 | Sps Technologies, Llc |