NSN 5306-00-081-0506
Wheel Bolt
1.370 inches fastener length, dee head style, 0.750 inches head diameter, head height: 0.130 inches .
Manufacturer part number 3-40692-1 for national stock number 5306000810506.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-081-0506.
-
MPN or Model
3-40692-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.370 inches -
Fastener Length
1.370 inches -
Head Style
Dee -
Head Diameter
0.750 inches -
Head Height
0.130 inches -
Distance From Centerline To Flat
Between 0.280 inches and 0.290 inches -
Shank Unthreaded Hole Diameter
0.105 inches first hole and 0.111 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 0.980 inches and 1.020 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.220 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium grip -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-070-6421 MPN 4-24210-503Aircraft Trailing Edge
- 1560-00-074-2499 MPN 4-54222-1Air Inlet Duct Connector
- 1560-00-076-8533 MPN 2-10406-504Aircraft Access Door
- 1560-00-175-3866 MPN 14-50847-1Throttle Control Adapter
- 1560-00-709-3672 MPN 2-50423-3Gearbox Support
- 1560-01-445-0644 MPN 3-11835-51Aircraft Access Door
- 1560-01-445-0672 MPN 2-10448-21Aircraft Skin
- 1560-01-452-0515 MPN 14-32000-10Horizontal Stabilizer
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-081-0506 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Systems Corporation |
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Systems Corporation |
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Systems Corporation |
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Systems Corporation |
3-40692-1 | Northrop Grumman Systems Corporation |
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Technical Services, |
3-40692-1 | Northrop Grumman Systems Corporation |