NSN 5306-00-083-5218
Coaxial Connector
Between 2.012 inches and 2.059 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number C699-7-25 for national stock number 5306000835218.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-083-5218.
-
MPN or Model
C699-7-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.440 inches and 0.507 inches -
Fastener Length
Between 2.012 inches and 2.059 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.887 inches first hole and 1.919 inches first hole -
Material
Steel -
Material Specification
Nas-m-107, 50392 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-978-3018 MPN 51B464-9A14Shear Bolt
- 5320-00-279-9629 MPN HL219-8-19Pin-rivet
- 5320-01-132-2225 MPN HL611-5-6Pin-rivet
- 5305-00-005-0629 MPN NAS1190E04P6Socket Head Cap Screw
- 5305-00-078-9636 MPN SFT22-5-11Machine Screw
- 5305-00-323-2494 MPN 3MFRA588-187Close Tolerance Screw
- 5305-00-660-3027 MPN 53193-06-5Machine Screw
- 5305-00-891-1724 MPN 66117H5-16Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-083-5218 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C699-7-25 | Lockheed Martin Corporation |
EWSB22-7-25 | Sps Technologies, Llc |
VS2521-7F-21S | Alcoa Global Fasteners, Inc. |
EWSB22-7-25 | Sps Technologies Inc |