NSN 5306-00-084-0610
Coaxial Connector
Between 1.000 inches and 1.047 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number PBF10788-18 for national stock number 5306000840610.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-084-0610.
-
MPN or Model
PBF10788-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.557 inches -
Fastener Length
Between 1.000 inches and 1.047 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
M-107, 50392 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b manufacturers standard
More from these suppliers
- 5305-00-518-5287 MPN LS15262V06-10Machine Screw
- 5305-01-054-4634 MPN BACB30LU4-16Close Tolerance Screw
- 5305-01-417-6537 MPN 3M1169D3-2AFClose Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-508-2214 MPN 3M1169C7-12AClose Tolerance Screw
- 5305-01-519-8247 MPN BACS12ER3K20Machine Screw
- 5306-00-988-6601 MPN 3M33-10-109Shear Bolt
- 5306-01-004-9474 MPN 327B455P23Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-084-0610 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF10788-18 | Sps Technologies, Llc |
AIC516B8-18 | Sps Technologies, Llc |
VAL22034-8F18 | Valley-todeco, Inc. |
EWSB22D8-A18 | Sps Technologies, Llc |
BM17020-8-18A | Huck International, Inc. |
VS2521-8F18 | Arconic Global Fasteners & Rings, |
EWSB22-8A18 | Sps Technologies, Llc |
H401-8-18 | Huck Intl Inc |
GB511B8-18 | Northrop Grumman Systems Corporation |
EWSB22D8-A18 | Sps Technologies, Llc |
VS2521-8F18 | Alcoa Global Fasteners, Inc. |
GB511B8-18 | Alcoa Global Fasteners, Inc. |
BM17020-8-18A | Huck Intl Inc |
EWSB22-8A18 | Sps Technologies Inc |
H401-8-18 | Huck International, Inc. |