NSN 5306-00-086-7385
Close Tolerance Hex Head Bolt
Between 1.761 inches and 1.791 inches fastener length, hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS673V23D for national stock number 5306000867385.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-086-7385.
-
MPN or Model
NAS673V23D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 1.761 inches and 1.791 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.608 inches first hole and 1.618 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy uns r54520 -
Material Specification
As 621 comp 6al-4 federal specification 11th material response or ms 4928 assn standard single material response -
Thread Series Designator
Unf -
Specification Data
80205-nas673 professional/industrial association standard
More from these suppliers
- 5930-00-683-1628 MPN MS24523-22Toggle Switch
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1190E04P6Socket Head Cap Screw
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-051-8492 MPN MS24625-1Tapping Screw
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-086-7385 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS673V23D | National Aerospace Standards |