NSN 5306-00-087-1636
Wheel Bolt
1.000 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.484 inches and 0.500 inches .
Manufacturer part number MS16208-30 for national stock number 5306000871636.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-087-1636.
-
MPN or Model
MS16208-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.875 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.484 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
75000 pounds per square inch -
Minimum Yield Strength
30000 pounds per square inch -
Material
Steel comp 302 or steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 -
Material Specification
Qq-w-423 federal specification all material responses or qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-619-0145 MPN E0760F17-06BLElectrical Connector Backshell
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393C00-3Machine Screw
- 5305-00-054-9256 MPN MS51047-47Setscrew
- 5305-00-058-9377 MPN MS51977-49Setscrew
- 5305-00-060-9253 MPN NAS1123-4HClose Tolerance Screw
- 5305-00-068-0542 MPN NASM24678-7CSocket Head Cap Screw
- 5305-00-071-1779 MPN MS90725-126Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-087-1636 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16208-30 | National Aerospace Standards |
MS16208-30 | Military Standards |
Stock Check
- NS: 2233
- NE: 187