NSN 5306-00-087-3744
Wheel Bolt
2.047 inches fastener length, hexagon head style, between 0.359 inches and 0.391 inches head height, width between flats: between 0.741 inches and 0.751 inches .
Manufacturer part number MS20073-08-20 for national stock number 5306000873744.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-087-3744.
-
MPN or Model
MS20073-08-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.797 inches -
Fastener Length
2.047 inches -
Head Style
Hexagon -
Head Height
Between 0.359 inches and 0.391 inches -
Width Between Flats
Between 0.741 inches and 0.751 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.500 inches -
Grip Length
1.250 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-070-5833 MPN MS90537-20Radio Frequency Coil
- 5935-00-079-4068 MPN MS3100R28-20PElectrical Receptacle Connector
- 5935-00-080-8670 MPN MS3103-18-9SElectrical Receptacle Connector
- 5930-00-147-0844 MPN MS16109-30-4-6NRotary Switch
- 5935-00-149-3536 MPN MS3108B28-1SElectrical Plug Connector
- 5935-00-163-3487 MPN MS3116J8-4PElectrical Plug Connector
- 5935-00-242-2367 MPN MS3110E8-33PElectrical Receptacle Connector
- 5905-00-279-2670 MPN MS35043-228Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-087-3744 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20073-08-20 | Military Standards |
Stock Check
- NS: 5
- NE: 7