NSN 5306-00-089-6605
Wheel Bolt
1.375 inches fastener length, double hexagon extended washer head style, 0.500 inches head height, width between flats: 0.559 inches .
Manufacturer part number R110P8SL for national stock number 5306000896605.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-089-6605.
-
MPN or Model
R110P8SL
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
1.375 inches -
Head Style
Double hexagon extended washer -
Head Height
0.500 inches -
Width Between Flats
0.559 inches -
Extended Washer Diameter
0.750 inches -
Extended Washer Thickness
0.023 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.500 inches -
Grip Length
0.125 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
42.0 rockwell c and 46.0 rockwell c -
Hole Configuration Style
Double hexagon flats -
Material
Steel -
Precious Material
Silver -
Surface Treatment
Silver -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-060-9768 MPN R984P1002AWire Wound Fixed Resistor
- 4920-00-068-0958 MPN 21C2223-010Coupling Shaft
- 4920-00-075-5710 MPN 21C3097G001Aircraft Engine Maintenance Fixture
- 4920-00-179-7176 MPN 1C5988G01Aircraft Engine Maintenance Stand
- 4920-00-723-7572 MPN 21C483Stator Protector
- 5935-00-754-5480 MPN 21C1539-201Electrical Connector Cover
- 4920-00-776-9449 MPN 21C825G001Interface Device Adapter Assembly
- 4920-00-860-3939 MPN 21C2164G001Aircraft Maintenance Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-089-6605 machine boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| R110P8SL | General Electric Company |
| R110P8SL | General Electric Co |
Stock Check
