NSN 5306-00-094-1900
Externally Relieved Body Bolt
2.812 inches fastener length, dee head style, 0.938 inches head diameter, head height: 0.125 inches .
Manufacturer part number 2104947 for national stock number 5306000941900.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-094-1900.
-
MPN or Model
2104947
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
2.812 inches -
Head Style
Dee -
Head Diameter
0.938 inches -
Head Height
0.125 inches -
Distance From Centerline To Flat
0.375 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
First Diameter From Head
Between 0.745 inches and 0.747 inches -
Second Diameter From Head
Between 0.654 inches and 0.664 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
2.281 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
2.406 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.687 inches first hole -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 4130 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-046-5176 MPN 4445518Drum
- 1560-00-075-8185 MPN 5820045-1Aircraft Structural Component Fitting
- 1560-00-123-0300 MPN 110845Control Column Key
- 1560-00-330-5989 MPN 4381076-501Elevato Bungee Assy
- 1560-00-346-0638 MPN 4549752Fitting Assy
- 1560-00-650-4772 MPN 7674525Quick Engine Ch Kit
- 1560-00-753-5338 MPN 3815003-504Fitting Assembly
- 1560-00-854-5228 MPN 4676968Bungee Cap
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-094-1900 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2104947 | Boeing Company, The |
2104947 | Boeing Company, The |