NSN 5306-00-094-6890
Close Tolerance Hex Head Bolt
Between 7.750 inches and 7.797 inches fastener length, hexagon head style, 0.344 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 3M33-10D109 for national stock number 5306000946890.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-094-6890.
-
MPN or Model
3M33-10D109
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.842 inches and 0.953 inches -
Fastener Length
Between 7.750 inches and 7.797 inches -
Head Style
Hexagon -
Head Height
0.344 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6234 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.146 inches first hole -
Thread Diameter
0.6250 inches -
Grip Length
6.813 inches -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
7.547 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-081-3745 MPN 5M1030-1Push Switch
- 1560-00-137-5299 MPN 53-65019-5Cable Guard Tube
- 1560-00-140-6698 MPN 32-32106-31Airframe Beam
- 1680-00-197-3707 MPN 53-79006H228Wire Bundle Assembl
- 1560-00-213-9868 MPN 53-42020-4Access Door Sill Angle
- 1560-00-226-5379 MPN 53-42001-606Aircraft Door
- 1560-00-238-2428 MPN 68A321103-2047Aircraft Skin
- 1560-00-239-0330 MPN 32-11537-26Wing Rib
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-094-6890 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-10D109 | Boeing Company, The |