NSN 5306-00-097-6867
Wheel Bolt
2 holes 90 degrees apart.
Manufacturer part number 615821 for national stock number 5306000976867.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-097-6867.
-
MPN or Model
615821
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.260 inches and 0.340 inches -
Fastener Length
Between 1.380 inches and 1.400 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.120 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Shank Unthreaded Hole Diameter
0.065 inches first hole and 0.072 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.060 inches and 1.120 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
30.0 rockwell c and 38.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.275 inches first hole and 1.285 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Stainless steel -
Material Specification
Ams 5616 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-070-7229 MPN PWA17216Aircraft Engine Maintenance Fixture
- 4920-00-502-2605 MPN PWA52613Pressure Test Adapter
- 4920-00-897-6983 MPN PWA12630Compre Clamping Rod
- 4820-00-941-9609 MPN 516798Flat Valve Diaphragm
- 4920-00-942-8599 MPN PWA15604Aircraft Maintenance Fixture
- 4920-00-953-8549 MPN PWA21875Pressure Regulator
- 4920-01-020-1825 MPN PWA37249Aircraft Maintenance Fixture
- 4920-01-020-4862 MPN PWA53492Aircraft Engine Maintenance Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-097-6867 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
615821 | Royal Oak Gage Inc |
615821 | United Technologies Corporation |