NSN 5306-00-102-9131
Externally Relieved Body Bolt
1.090 inches fastener length, hexagon head style, between 0.141 inches and 0.156 inches head height, width between flats: 0.500 inches .
Manufacturer part number 12W8698-9 for national stock number 5306001029131.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-102-9131.
-
MPN or Model
12W8698-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.156 inches -
Fastener Length
1.090 inches -
Head Style
Hexagon -
Head Height
Between 0.141 inches and 0.156 inches -
Width Between Flats
0.500 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
First Diameter From Head
Between 0.241 inches and 0.251 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.104 inches -
Thread Diameter
0.312 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-137-7183 MPN E1124-364-20KCElectrical Connector Backshell
- 1560-00-239-9835 MPN 12H1424-801Aircraft Structural Component Support
- 4920-00-246-7202 MPN 12A3696-1Flight Control System Test Set
- 1560-00-402-3552 MPN 12B4040-7Aircraft Access Cover
- 1560-00-436-8047 MPN 12S1115-3Pylon Fairing Assembly
- 1560-00-767-8431 MPN 12W9583-12Aircraft Hinge
- 1560-00-864-9148 MPN 12W8873-801Aircraft Structural Component Support
- 1560-00-928-7702 MPN 12M9589-7Hold Open Device Link
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-102-9131 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12W8698-9 | Lockheed Martin Corporation |