NSN 5306-00-106-6321
Wheel Bolt
0.562 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9556-07 for national stock number 5306001066321.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-106-6321.
-
MPN or Model
MS9556-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.470 inches and 0.490 inches -
Fastener Length
0.562 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.072 inches and 0.092 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-275-4688 MPN 856A4062Aircraft Maintenance Fixture
- 4920-01-295-2666 MPN 856A2639G01Aircraft Maintenance Fixture
- 1560-01-621-4158 MPN 305-621-205-0Aircraft Thrust Reverser Section
- 5306-00-097-7307 MPN J644P12AMachine Bolt
- 5306-01-270-4226 MPN J815P046AClose Tolerance Bolt
- 5935-00-081-5945 MPN MS3101R28-21SZElectrical Plug Connector
- 5905-00-116-8569 MPN MS35043-85Composition Fixed Resistor
- 5935-00-131-9308 MPN MS24265R18B8P6Electrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-106-6321 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9556-07 | Military Standards |
J643P06A | Cfm International, Inc. |
10114156 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NE: 23400
- NS: 450
- SV: 19
- AR: 8
- OH: 1