NSN 5306-00-110-6315
Wheel Bolt
Between 1.610 inches and 1.630 inches fastener length, double hexagon w/hole head style, between 0.310 inches and 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 9662M66P04 for national stock number 5306001106315.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-110-6315.
-
MPN or Model
9662M66P04
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Unit Weight (Est.)
50 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.570 inches and 0.610 inches -
Fastener Length
Between 1.610 inches and 1.630 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.310 inches and 0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.020 inches and 1.040 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
30.0 rockwell c -
Minimum Yield Strength
100000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-036-6655 MPN R984P1102Wire Wound Fixed Resistor
- 5905-00-141-1383 MPN R984P3400AWire Wound Fixed Resistor
- 1560-00-236-4403 MPN 665E780G02Thrust Reverser Connector
- 4920-00-570-8595 MPN 1C5013G1 Portable Test Cell
- 4920-00-594-2456 MPN 1C2695Shaft Stu Protector
- 4920-00-834-4126 MPN 1C5672G01Aircraft Engine Maintenance Fixture
- 4920-00-896-2256 MPN 1C5475-1G1Aircraft Maintenance Fixture
- 5930-00-994-3397 MPN 21C2222-246Pressure Switch
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-110-6315 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9662M66P04 | General Electric Company |
9022M50P01 | General Electric Company |