NSN 5306-00-115-9374
Wheel Bolt
1.062 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS21279-15 for national stock number 5306001159374.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-115-9374.
-
MPN or Model
MS21279-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.685 inches -
Fastener Length
1.062 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.377 inches and 0.437 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-014-0378 MPN MS75009-31Resistor Holder
- 5935-00-030-9965 MPN MS3111F16-26PElectrical Plug Connector
- 5935-00-114-0731 MPN MS3111F14-5SElectrical Plug Connector
- 4820-00-141-9038 MPN MIL-V-7899Check Valve
- 5935-00-159-0134 MPN MS3400R20-16SElectrical Receptacle Connector
- 5935-00-173-7858 MPN MS3102A16S1PWElectrical Receptacle Connector
- 5935-00-201-7290 MPN MS27484T22A21SBElectrical Plug Connector
- 5935-00-238-0823 MPN MS3102R14S9SYElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-115-9374 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21279-15 | Military Standards |